The Vacuuming formation system for prismatic lithium power cell is used for the pre-charge and vacuuming formation process of prismatic li-ion cell, which consists of power supply unit, mechanism unit, vacuuming system and safety modules.
1.Product Introduction of Vacuuming formation system for prismatic lithium power cell
2.Product Parameter (Specification)
Item | Parameters |
Rated value | 5V100A~200A 16-48 CH |
Circuit mode | Recycled switch type charge and discharge |
Voltage range | CC 0.0 ~ 5.0V/DC 1.8 ~ 5.0V |
Voltage accuracy/resolution | ±1mV/0.1mV |
Current range | 0.08A ~40/80/100A |
Current accuracy/resolution | ±0.05%FS/0.1mA |
Temperature sensing deviation | ≤1℃ |
Measurement period/resolution | 0 ~ 999h/ 1s |
Average efficiency | ≥80%/≥75% |
Power supply | 380V/3-phase 50Hz/low harmonic/high PFC |
3.Feature And Application of Vacuuming formation system for prismatic lithium power cell
· Module design, probe plate can be easily extracted from the service passage for maintenance.
· Cooling design, with individual air duct in the station to ensure temperature consistency.
· Flexible design, tray jacked up to contact pin bed and separated swiftly in case of abnormality.
· Reliable design, all electronic components with three proofing spraying and heat resistance design, tolerable temperature≥50℃.
· Safety protection, with 50 hardware and software protection measures like voltage, capacity, time etc.
· Firefighting design, five-sided fire insulation board and automatic front isolation door with temperature and smoke sensors inside the station.
· Technical advantages, low energy loss, 15-25% lower energy consumption; 80% high efficiency, high accuracy consistency, current stability.
4.Qualification of Vacuuming formation system for prismatic lithium power cell
5.Deliver,Shipping And Serving
1 year warranty
24/7 service
200+ service engineers
5 years parts supply